SIMPLE GUIDE TO INSTALLING A NEW SHOWER UNIT

Simple Guide to Installing a New Shower Unit

Simple Guide to Installing a New Shower Unit

Blog Article

Call Today

Were you on the lookout for help and advice about How to Install a One-Piece Shower Unit?


How to Install a Shower Enclosure
A successful shower setup calls for careful planning as well as a great deal of job. For the most part, you will require to do 3 types of jobs: mounting walls, mounting the plumbing, and also completing walls.

Prep work


First of all, you must select the type of shower that you wish to mount. It is necessary to identify whether the picked shower can handling certain systems as well as can manage a secure degree of water through the boiler. The majority of shower systems nowadays are developed to be adaptable to various water pressures (such as stored hot water and also cool mains).
It is likewise essential to take into account the water pressure and the planning of the piping as well as drain for the shower

Various Kinds Of Shower Units


  • Push-on Mixer: The pipe and spray parts of the push-on mixer shower unit can be connected to the bath faucet based on your demand, as well as the water temperature can be adjusted by means of the faucets. Push-on mixers are cheap and extremely simple to mount. Nevertheless, although the hose pipe link is basic, it is easily displaced. Additionally, it is bothersome to change the temperature.

  • Bath/Shower Mixer: The tube and spray of this sort of shower are combined with a bathroom mixer tap, and the temperature can be readjusted through the bathroom faucets. It is a very cheap choice and also no added plumbing is entailed. However, the bath/shower mixers likewise deal with inconvenient temperature control choices.

  • Handbook Mixer: The hose as well as spray of a manual mixer shower system belong of the wall unit and also the cold and hot water products are attached to a single valve The temperature as well as pressure of the water are controlled through either one or a variety of handles (in more expensive showers). Although temperature level control is a lot easier in hands-on mixer kinds, they are a lot more expensive than the previously stated mixers. They additionally need additional plumbing of cold and hot water system pipelines.

  • Thermostatic Mixer: The pipe and spray of this shower kind are a part of the wall surface unit and also the hot and cold water supplies are attached to a single valve below as well. It is complete with a built-in stabiliser to self-adjust the water temperature level as well as to stop it from ending up being also hot. One of the largest advantages of a thermostatic mixer shower type consists of practical temperature level control. Nonetheless, it is the most expensive of the different mixer choices.

  • Power Shower: A power shower is a solitary device having a powerful electric pump that is capable of changing both the water pressure and temperature. This sort of shower can be fitted if there is supply of water from a cold water cistern and a hot water cyndrical tube. A power shower makes the change of both pressure as well as temperature level simple. On the other hand, it disagrees for water warmed directly by the shower or where the water is provided by a combination central heating boiler under keys pressure.

  • Electric Shower: An electric shower is plumbed into a keys cold water supply and it warms the water electrically. It is essential to note that for this shower type to be mounted, the mains pressure requires to be at the very least 0.7 kg/sq centimeters (10lb/sq in). The device permits the temperature level as well as pressure to be adjusted through a handle. Models with temperature level stabilisers are much better as they continue to be unaffected by various other faucets elsewhere being used within the household. A significant downside of electric showers is that the control handle just permits the alternative of heats at less pressure, or reduced temperature levels at a greater stress. This is troublesome in the winter when the spray is often weak and the keys water is colder. However, this issue is taken on in some models which are offered with a winter/summer setting.

  • Approach


    Depending upon the type of shower you wish to mount, the shower head have to either be suited order to avoid its contact with the water in the bathroom listed below or the base tray, or it should have a check valve.
    Prior to starting, it is advisable to mark the settings of the shower head and control, and also to prepare the pipe-work included. Additionally, the drain system to eliminate the drainage will need to be prepared. Both settings of the cable television route and also the shower switch will additionally require to be thought about if a rapid or electric shower device is being installed.
    Use the guideline guide provided with the shower system to fit the shower control.Before fitting the pipes that will supply the water to the shower system, it is very important to remove the water. In order to protect the pipelines, they ought to be offered a water resistant covering and additionally fitted with isolating shutoffs. The pipelines can after that be buried right into the wall as well as glued over to neaten the total look.
    Fit the base tray, shower head, and fittings.
    Attach the main shower control to the pipelines that will certainly be supplying the water (This may call for a women screw string adapter).
    Reconnect the water system and also test the pipelines for any type of leakages, as some may need firm.
    If you are installing an electric shower, bear in mind to switch off the electrical energy supply before making any type of electric links. When these connections have actually been made (there must be guidance within the user's manual), the power supply can be switched back on.

    Adjusting Water Pressure to Suit Your Shower


    The cold water tank can be lifted to a higher height (in some cases as little as 150mm (6inches)) by fitting a strong wood assistance beneath it - potentially made up of struts and also blockboards. If you pick this alternative, the main as well as distribution pipelines will likewise need to be increased to meet the new elevation of the tank.
    Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is selected, it has to be connected right into the power supply in order to run.

    Piping and Drain


    It is best to make use of 15mm diameter supply pipes, and make the runs to the shower as brief and also straight as feasible so regarding keep optimal stress and also reduce heat loss. Additionally, by reducing using elbows for pipeline corners, you can lower the resistance in the circulation of the water supply. You can achieve this by flexing the pipelines instead.

    Many Common Blunders


  • Breaching or disregarding local code limitations.

  • Making use of pipes that are also small.

  • Connecting copper to galvanized without utilizing a brass or dielectric fitting in between the two.

  • Not using tape or pipe substance at threaded joints.

  • Uneven your components when mounting them.

  • Not mounting an air void filling for components.

  • Cutting supply stub outs also short to install the shutoff valves onto after the ended up wall remains in area.

  • Not properly straightening tubing right into installations or stop valves. (Forcing the nut onto the compression ring at an angle when the tubes is at an angle will certainly create a leak.).

  • When transforming the water back on in your house, always run the outside tube valve or purge your commodes to bleed dust and also air from the lines. This debris can trigger issues in your sink taps as well as other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.


    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.


    Are you confused?


    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.


    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.


    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.


    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.


    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.


    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Install a One-Piece Shower Unit

    Do you enjoy reading up on How to Install a Direct-to-Stud Shower Enclosure? Place a review directly below. We will be pleased to listen to your reactions about this page. We hope that you visit us again in the future. Sharing is nice. One never knows, you may very well be doing someone a favor. Thank you so much for taking the time to read it.


    Book Today!

    Report this page